DC-60C Spindle Technical Data Sheet | ||||
Application of Industry |
Engraving Glass/Acrylic |
|||
Spindle Type |
DC-60C |
Rated frequency (Hz) |
167~1000 |
|
Rated speed (rpm) |
10000~60000 |
Rated voltage (V) |
33~200 |
|
Maximum current (A) |
5 |
Power (Kw) |
1.5(max) |
|
1 |
Cone Run-out(μm) |
1.27(max) |
||
2 |
Cylinder working pressure(kg f/cm2) |
5.6-6.0 |
||
3 |
Method of Tool Change |
Automatic |
||
4 |
Collet torque(N·cm) |
≥254 (Φ6) |
||
5 |
Static deflection at shaft end (μm) |
≤2.0 |
||
6 |
Dynamic deflection at shaft end (μm) |
≤8.0 |
||
7 |
Vibration(mm/s) |
≤1.0 |
||
8 |
Diameter of the mounting diameter(mm) |
Φ61.902~61.91 |
||
9 |
Cooling system water flow rate(L/min) |
Water:≥1.6,Oil:≥3.0 |
||
10 |
Cooling system water pressure(kg f/cm2) |
Water:≥2.5,Oil:≥4.0 |
||
11 |
Motor winding insulation resistance(MΩ) |
≥500(grade H) |
||
12 |
Motor winding voltage test(V/M) |
1500V/1 Min |
||
13 |
Noise value(dBA) |
≤72 |
||
14 |
Spindle dust blowing pressure(kg f/cm2) |
2.5~3.0 |
||
15 |
Spindle blowing dust gas flow(L/min) |
≥60 |